Get Meeting Participant Details
Get a meeting participant details of a live or post meeting. The participantId
is required to identify the meeting and the participant.
The authenticated user calling this API must either have an Administrator role with the meeting:admin_participants_read
scope, or be the meeting host.
URI Parameters
The unique identifier for the meeting and the participant.
Query Parameters
Email address for the meeting host. This parameter is only used if the user or application calling the API has the admin-level scopes, the admin may specify the email of a user in a site they manage and the API will return meeting participants of the meetings that are hosted by that user.
Response Properties
The ID that identifies the meeting and the participant.
The ID that identifies the organization. It only applies to participants of ongoing meetings.
Whether or not the participant is the host of the meeting.
Whether or not the participant has host privilege in the meeting.
Whether or not the participant is the team space moderator. This field returns only if the meeting is associated with a Webex space.
The email address of the participant.
The name of the participant.
Whether or not the participant is invited to the meeting.
Whether or not the participant's audio is muted.
The time the meeting started.
The status of the participant's video.
The video is turned on.
The video is turned off.
The status of the participant in the meeting. The value of state
is breakoutSession
which is only returned when the meeting is in progress and the breakout session is enabled.
The participant is waiting in the meeting lobby.
The participant has left the meeting.
The participant has joined the meeting and is in the main session.
The participant has joined a breakout session.
The ID of the breakout session including the participant.
The time the participant joined the meeting. If the field is non-existent or shows 1970-01-01T00:00:00.000Z
the meeting may be still ongoing and the joinedTime
will be filled in after the meeting ended. If you need real-time join events, please refer to the webhooks guide.
The time the participant left the meeting. If the field is non-existent or shows 1970-01-01T00:00:00.000Z
the meeting may be still ongoing and the leftTime
will be filled in after the meeting ended. If you need real-time left events, please refer to the webhooks guide.
The site URL.
A unique identifier for the meeting which the participant belongs to.
The email address of the host.
An internal ID that is associated with each join.
The type of the device.
The audio type that the participant is using.
PSTN
VoIP
The participant is not connected to audio.
The time the device joined the meeting. If the field is non-existent or shows 1970-01- 01T00:00:00.000Z
the meeting may be still ongoing and the joinedTime
will be filled in after the meeting ended. If you need real-time joined events, please refer to the webhooks guide.
The time the device left the meeting, leftTime
is the exact moment when a specific devi ce left the meeting. If the field is non-existent or shows 1970-01-01T00:00:00.000Z
the meeting may be still ongoing and the leftTime
will be filled in after the meeting ended. If you need real-time left events, please refer to the webhooks guide.
The duration in seconds the device stayed in the meeting.
The PSTN call type in which the device joined the meeting.
Connect audio by dialing a toll or toll-free phone number provided by the meeting.
Connect audio by dialing out a phone number from the meeting.
The PSTN phone number from which the device joined the meeting. Only compliance officer can retrieve the phoneNumber
. The meeting host and admin users cannot retrieve it. NOTE: The phoneNumber
will be returned after the meeting ends; it is not returned while the meeting is in progress.
The breakout sessions attended by the participant. Only applies to ended meeting instances.
Unique identifier for the breakout session the participant attended.
Name of the breakout session the participant attended.
The time the participant joined the breakout session.
The time the participant left the breakout session.
The source ID of the participant. The sourceId
is from the Create Invitation Sources API.
Response Codes
The list below describes the common success and error responses you should expect from the API.
Code | Status | Description |
---|---|---|
200 | OK | Successful request with body content. |
201 | Created | The request has succeeded and has led to the creation of a resource. |
202 | Accepted | The request has been accepted for processing. |
204 | No Content | Successful request without body content. |
400 | Bad Request | The request was invalid or cannot be otherwise served. An accompanying error message will explain further. |
401 | Unauthorized | Authentication credentials were missing or incorrect. |
403 | Forbidden | The request is understood, but it has been refused or access is not allowed. |
404 | Not Found | The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method. |
405 | Method Not Allowed | The request was made to a resource using an HTTP request method that is not supported. |
409 | Conflict | The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once. |
410 | Gone | The requested resource is no longer available. |
415 | Unsupported Media Type | The request was made to a resource without specifying a media type or used a media type that is not supported. |
423 | Locked | The requested resource is temporarily unavailable. A Retry-After header may be present that specifies how many seconds you need to wait before attempting the request again. |
428 | Precondition Required | File(s) cannot be scanned for malware and need to be force downloaded. |
429 | Too Many Requests | Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made. |
500 | Internal Server Error | Something went wrong on the server. If the issue persists, feel free to contact the Webex Developer Support team. |
502 | Bad Gateway | The server received an invalid response from an upstream server while processing the request. Try again later. |
503 | Service Unavailable | Server is overloaded with requests. Try again later. |
504 | Gateway Timeout | An upstream server failed to respond on time. If your query uses max parameter, please try to reduce it. |
Header
Query Parameters
- hostEmailstringEmail address for the meeting host. This parameter is only used if the user or application calling the API has the admin-level scopes, the admin may specify the email of a user in a site they manage and the API will return meeting participants of the meetings that are hosted by that user.
{ "id": "560d7b784f5143e3be2fc3064a5c4999_3c2e2338-e950-43bf-b588-573773ee43d1", "orgId": "1eb65fdf-9643-417f-9974-ad72cae0e10f", "host": true, "coHost": false, "spaceModerator": false, "email": "joeDoe@cisco.com", "displayName": "Joe Doe", "invitee": false, "muted": false, "meetingStartTime": "2020-10-02T17:31:00Z", "video": "on", "state": "lobby", "breakoutSessionId": "2e373567-465b-8530-a18a-7025e1871d40", "joinedTime": "2022-10-25T09:00:00Z", "leftTime": "2022-10-25T09:30:00Z", "siteUrl": "example.webex.com", "meetingId": "3a688f62840346e8b87dde2b50703511_I_197977258267247872", "hostEmail": "janeDoe@cisco.com", "devices": [ { "correlationId": "8ccced6c-b812-4dff-a5dd-4c5c28f8d47d", "deviceType": "webex_meeting_center_mac", "audioType": "pstn", "joinedTime": "2019-04-23T17:31:00.000Z", "leftTime": "2019-04-23T17:32:00.000Z", "durationSecond": 60, "callType": "callIn", "phoneNumber": "745273328" } ], "breakoutSessionsAttended": [ { "id": "c84ba778-2f46-4dc6-9459-398694732d70", "name": "Breakout session 1", "joinedTime": "2022-10-25T09:05:00Z", "leftTime": "2022-10-25T09:10:00Z" } ], "sourceId": "cisco" }