Create a Trunk
Create a Trunk for the organization.
A Trunk is a connection between Webex Calling and the premises, which terminates on the premises with a local gateway or other supported device. The trunk can be assigned to a Route Group which is a group of trunks that allow Webex Calling to distribute calls over multiple trunks or to provide redundancy.
Creating a trunk requires a full administrator auth token with a scope of spark-admin:telephony_config_write
.
Query Parameters
Organization to which trunk belongs.
Body Parameters
A unique name for the trunk.
ID of location associated with the trunk.
A password to use on the trunk.
Dual Identity Support setting impacts the handling of the From header and P-Asserted-Identity header when sending an initial SIP INVITE
to the trunk for an outbound call.
Trunk Type associated with the trunk.
For Cisco CUBE Local Gateway.
For Cisco Unified Border Element, Oracle ACME Session Border Controller, AudioCodes Session Border Controller, Ribbon Session Border Controller.
Device type assosiated with trunk.
FQDN or SRV address. Required to create a static certificate-based trunk.
Domain name. Required to create a static certificate based trunk.
FQDN port. Required to create a static certificate-based trunk.
Max Concurrent call. Required to create a static certificate based trunk.
Response Properties
ID of the newly created trunk.
Response Codes
The list below describes the common success and error responses you should expect from the API.
Code | Status | Description |
---|---|---|
200 | OK | Successful request with body content. |
201 | Created | The request has succeeded and has led to the creation of a resource. |
202 | Accepted | The request has been accepted for processing. |
204 | No Content | Successful request without body content. |
400 | Bad Request | The request was invalid or cannot be otherwise served. An accompanying error message will explain further. |
401 | Unauthorized | Authentication credentials were missing or incorrect. |
403 | Forbidden | The request is understood, but it has been refused or access is not allowed. |
404 | Not Found | The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method. |
405 | Method Not Allowed | The request was made to a resource using an HTTP request method that is not supported. |
409 | Conflict | The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once. |
410 | Gone | The requested resource is no longer available. |
415 | Unsupported Media Type | The request was made to a resource without specifying a media type or used a media type that is not supported. |
423 | Locked | The requested resource is temporarily unavailable. A Retry-After header may be present that specifies how many seconds you need to wait before attempting the request again. |
428 | Precondition Required | File(s) cannot be scanned for malware and need to be force downloaded. |
429 | Too Many Requests | Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made. |
500 | Internal Server Error | Something went wrong on the server. If the issue persists, feel free to contact the Webex Developer Support team. |
502 | Bad Gateway | The server received an invalid response from an upstream server while processing the request. Try again later. |
503 | Service Unavailable | Server is overloaded with requests. Try again later. |
504 | Gateway Timeout | An upstream server failed to respond on time. If your query uses max parameter, please try to reduce it. |
Header
Query Parameters
- orgIdstringOrganization to which trunk belongs.
Body
- namestringRequiredA unique name for the trunk.
- locationIdstringRequiredID of location associated with the trunk.
- passwordstringRequiredA password to use on the trunk.
- dualIdentitySupportEnabledbooleanDual Identity Support setting impacts the handling of the From header and P-Asserted-Identity header when sending an initial SIP `INVITE` to the trunk for an outbound call.
- trunkTypeTrunkTypeRequiredTrunk Type associated with the trunk.
- deviceTypestringDevice type assosiated with trunk.
- addressstringFQDN or SRV address. Required to create a static certificate-based trunk.
- domainstringDomain name. Required to create a static certificate based trunk.
- portnumberFQDN port. Required to create a static certificate-based trunk.
- maxConcurrentCallsnumberMax Concurrent call. Required to create a static certificate based trunk.
{ "name": "trunkName", "locationId": "Y2lzY29zcGFyazovL3VzL1JPVVRFX0dST1VQLzA1OWEyNzNlLWJiYjAtMTFlYy04NDIyLTAyNDJhYzEyMDAwMg", "password": "password", "dualIdentitySupportEnabled": null, "trunkType": null, "deviceType": "Cisco Unified Border Element", "address": "lgw1.london", "domain": "acme.corp", "port": null, "maxConcurrentCalls": null }
{ "id": "Y2lzY29zcGFyazovL3VzL1JPVVRFX0dST1VQLzA1OWEyNzNlLWJiYjAtMTFlYy04NDIyLTAyNDJhYzEyMDAwMg" }