Update DECT Network
Update the details of a DECT network.
DECT Networks provide roaming voice services via base stations and wireless handsets. A DECT network can be provisioned up to 1000 lines across up to 254 base stations.
This API requires a full or read-only administrator auth token with a scope of spark-admin:telephony_config_write.
URI Parameters
Update DECT network details in the specified location.
Update DECT network details in the specified DECT network.
Query Parameters
Update DECT network details in the specified organization.
Body Parameters
Name of the DECT network. This should be unique across the location.
DECT network name that will be displayed on the handset.
Default access code is enabled. If true, the default access code is mandatory. If false, an auto-generated access code is used.
Default access code for the DECT network. The default access code should be unique within the same location to avoid the handset accidentally registering with base stations from different DECT networks in range. This is mandatory when defaultAccessCodeEnabled is true.
Response Codes
The list below describes the common success and error responses you should expect from the API.
| Code | Status | Description |
|---|---|---|
| 200 | OK | Successful request with body content. |
| 201 | Created | The request has succeeded and has led to the creation of a resource. |
| 202 | Accepted | The request has been accepted for processing. |
| 204 | No Content | Successful request without body content. |
| 400 | Bad Request | The request was invalid or cannot be otherwise served. An accompanying error message will explain further. |
| 401 | Unauthorized | Authentication credentials were missing or incorrect. |
| 403 | Forbidden | The request is understood, but it has been refused or access is not allowed. |
| 404 | Not Found | The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method. |
| 405 | Method Not Allowed | The request was made to a resource using an HTTP request method that is not supported. |
| 409 | Conflict | The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once. |
| 410 | Gone | The requested resource is no longer available. |
| 415 | Unsupported Media Type | The request was made to a resource without specifying a media type or used a media type that is not supported. |
| 423 | Locked | The requested resource is temporarily unavailable. A Retry-After header may be present that specifies how many seconds you need to wait before attempting the request again. |
| 428 | Precondition Required | File(s) cannot be scanned for malware and need to be force downloaded. |
| 429 | Too Many Requests | Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made. |
| 500 | Internal Server Error | Something went wrong on the server. If the issue persists, feel free to contact the Webex Developer Support team. |
| 502 | Bad Gateway | The server received an invalid response from an upstream server while processing the request. Try again later. |
| 503 | Service Unavailable | Server is overloaded with requests. Try again later. |
| 504 | Gateway Timeout | An upstream server failed to respond on time. If your query uses max parameter, please try to reduce it. |
Header
Query Parameters
- Update DECT network details in the specified organization.
Body
- Name of the DECT network. This should be unique across the location.
- DECT network name that will be displayed on the handset.
- Default access code is enabled. If true, the default access code is mandatory. If false, an auto-generated access code is used.
- Default access code for the DECT network. The default access code should be unique within the same location to avoid the handset accidentally registering with base stations from different DECT networks in range. This is mandatory when `defaultAccessCodeEnabled` is true.
{
"name": "Demo-DectNetwork",
"displayName": "Demo-DectNetwork",
"defaultAccessCodeEnabled": true,
"defaultAccessCode":1234
}